McGuire Flexbond TPO Primer - McGuire Roofing Products

One-step primer allows for excellent adhesion of TPO membrane to pressure-sensitive TPO accessories.
Fast flash-off for faster installation.

Coverage Rates

Thoroughly stir this product until all settled pigment is blended into the solution. Solids suspended in TPO Primer tend to settle; stir or agitate the solution frequently during use.
The surface to which the TPO Primer is being applied should be dry and clean. TPO membrane can be cleaned with Weathered Membrane Cleaner prior to primer application.
Apply TPO Primer using a paintbrush or medium-nap paint roller. The membrane surface should be uniform in color with no streaking or puddling. Apply primer to a wider area than the actual splice area to ensure complete coverage.
Allow primer to flash off completely before applying pressure-sensitive TPO accessories. Drying conditions will vary depending on ambient air conditions.

Typical Properties and Characteristics
Sizes	¾” to 8” O.D. pipe (19.0 to 203.2 mm)
Packaging	8/box
Weight (each)	0.63 lbs (0.3 kg)
Material	Injection-molded TPO
Color	White, gray and tan

Please use the chart below to cross-reference your pipe size with the proper step to cut as shown.

Schedule 40 / 80 Steel Pipe – PVC Standard – Polyethylene Pipe IPS
Nominal Tube Size	1”	1¼”	1½”	2”	2½”	3”	4”	5”
Pipe O.D.	1.05	1.32	1.66	1.90	2.38	2.88	3.50	4.50
Step of Boot Used	1	1½	2	3	3	4	5	6

HARMFUL IF SWALLOWED. FLAMMABLE LIQUID. MAY BE IRRITATING TO SKIN AND EYES.

Wash thoroughly after handling. Avoid contact with eyes, skin, and clothing. Use permeation-resistant gloves (that meet ANSI/ISEA 105-2005) and safety glasses. Keep away from heat, sparks, motors, and open flame. DO NOT SMOKE WHILE USING. Keep lid closed when not in use.
If swallowed, DO NOT INDUCE VOMITING. Call a physician immediately. In case of eye contact, flush with water for at least 15 minutes. In case of skin contact, wash with soap and water. If irritation develops, call a physician.
In case of fire, handle as a solvent or gasoline fire. Use dry chemical, carbon dioxide, or foam fire extinguishers. Water fog or spray may be used to smother the fire and cool containers. Do not use a solid stream of water to fight fire because it can scatter and spread the fire.
Jobsite storage temperatures in excess of 90°F (32°C) may affect product shelf life. Should the primer be stored at temperatures lower than 60°F (15°C), restore to room temperature prior to use.
KEEP OUT OF REACH OF CHILDREN.