RV & Campers
RV Service & Repair Kit
TPO
PVC
EPDM
Frequently Asked Questions
A. A. EPDM B. TPO C. PVC.
A. A. EPDM- 30 mil, 35 mil, 45 mil B. TPO- 30 mil, 35 mil C. PVC 25 mil.
A. 10′ wide with all custom cut lengths up to 500′.
A. 10’
A. Easier installation, no additional cost from a 9’ length.
A. Cut the material to the desired length, allow the material to rest on top of the RV, adhere the membrane to the RV. (McGuire FlexBond Adhesive recommended, Alternatives will be industry used water based adhesives.
A. Utilize standard industry application practices. Apply adhesive at a rate of 1 gallon per every 160 square ft. or 1 gallon per 20 linear ft. Utilize a disposable chip brush on roof edges and around openings, for main portion of roof, utilize a small 3/8 nap roller to evenly distribute adhesive.
A. We recommend the McGuire Cap and Laps sealants; additional alternatives would be industry recognized Cap and Lap sealants.
A. McGuire recommends using the McGuire Butyl tape or the McGuire Gunnable Butyl 10 oz Tube; additional alternatives would be industry recognized Cap and Lap sealants.
